PureAware Air Quality Sensor

• PureAware sensor unit
• USB-C power cable
• Mounting bracket & screws
• This quick-start guide

Install at 1.2 – 1.8 m height on a wall or shelf.

Keep away from direct sunlight, heat sources, and AC vents.

Connect via USB-C (5 V DC, ≥1 A).

Wait 60 seconds for sensor warmup. LED blinks blue when ready.

1. Press the CONFIG button on the back of the device (if not already in AP mode)
2. Find network PureAware_XXXXXX on your phone/laptop
3. Password: 123456789
4. Captive portal opens automatically — or go to http://192.168.1.25:8080

1. Enter your WiFi SSID and password
2. Set hostname (optional)
3. Tap Save, then press the RUN button on the back — device reboots and joins your network

• mDNS: http://pureaware-XXXXXX.local
• Or check your router’s DHCP list for the IP
• Open http://<ip>/ for live readings

• Admin panel: http://<ip>:8080
• Login — user: admin / pass: pureaware
• Enable MQTT, BACnet, Modbus, Zabbix
• Set alarm thresholds & email alerts